X-BULL New Recovery Traction Tracks Sand Mud Snow Track Tire Ladder 4WD

Specification:

Size : 109cm x 31cm x 6cm
Material : reinforced strong nylon
Specification : 10 ton load capacity
CTN Size : 110X36X13CM
GW : 7kg per pair
Comes with a carry bag and two pair of fixed frames.
  • Raised tracks help prevent vehicle tires from spinning on snow, sand, mud or ice
  • No towing or pushing required
  • UV Stabilized-- Resilient design
  • Ideal for off-road use
  • Prevent your vehicle's tires from spinning when stuck in snow, mud or sand
                                       HOW TO USE
  At first sign of your vehicle being stuck, STOP. Don’t keep spinning the tires- It wont work
How deep you are and use a shovel to get underneath the tires. Dig a track in front of the front tires too, so there is minimal resistance to the vehicles pathway and you can keep your momentum.
Air down tires to as much as you are comfortable with (carry a compressor with you- It is an essential trail tool).
Rocks: 15 psi min.
Soft Sand: Deep / silt / soft sand 8 psi.
Beach sand: 10-12psi min.
Mud: 15psi depending on bottom (compensate for rocks/holes/branches)
Try and get the tracks up against the tires lowest surface so it can grab a cleat and pull underneath the vehicle. Once the tracks are under the tires, DO NOT increase RPM and spin tires, as this will burn the cleats off of the tracks . Maintain a steady throttle until you feel the truck rise up, then increase throttle until you are completely out of the obstacle and able to gain traction without aide.


Collections: Recovery Tracks

Type: Unknown Type