X-BULL RECOVERY TRACKS RECOVERY TRACTION TRACKS SAND - MUD - SNOW TIRE LADDER
$84.90 $99.90
Works with 2WD and 4WD Vehicles
Prevent your vehicle's tires from spinning when stuck
Snow, Mud, Sand, or Ice!
Everything you need for peace of mind
Comes with:
- 2 UV Stabilized Recovery Tracks
- 2 Pairs of Mounting Hardwares
- 1 X-Bull Branded Carrying Bag
- Complete Set, Nothing More to Buy
Specifications:
Size: 109cm x 31cm x 6cmt - 43 x 13 x 5.1 inches
Material: Reinforced, UV Stabilized Strong Nylon, 10-ton Capacity
Weight: 5.4kg per pair of Tracks - 11.9 pounds
Raised tracks help prevent vehicle tires from spinning
No towing or pushing required
HOW TO USE
When stuck, STOP! Don't keep spinning the tires- it won't work.
Step 1: Use a shovel to get underneath the tires. Dig a track in front of ALL tires to make a roll-out path. The goal is to reduce resistance so you can keep your momentum.
Step 2: Reduce tire pressure to a minimum amount you are comfortable with. X-Bull recommends carrying an air compressor, it's essential when off-road or in remote areas.
Suggested Tire Pressure*
Rocky terrain: 15 psi
Soft Sand: Deep silt, soft sand - 8 psi
Beach sand: 10-12psi
Mud: 15psi depending on bottom (compensate for rocks/holes/branches)
*Suggested tire pressures should be adjusted to meet the requirement of the vehicle.
Step 3: Position tracks against the tires so the tire will grab a cleat and pull the track underneath the tire. DO NOT SPIN THE TIRES, as this will burn the cleats off the tracks. Maintain a steady throttle until you feel the vehicle rise-up, then increase the throttle until you are free and able to gain traction.
Only shipped to the continental United States
X-BULL Recovery Tracks Mounting Hardware Kit Holders Roof Rack Mount Bracket 4WD 4x4
$29.90
Used for one pair of recovery tracks.
Two pairs of the hardwares.
The new hardwares had been upgraded, added anti-rust coating material, so the color of the products received will be darker than those in the picture
View full product details
X-BULL RECOVERY TRACKS Gen2-S RECOVERY TRACTION TRACKS
$59.90 $79.90
Specification:
Size : 91cm x 31cm x 6cm
Material : reinforced strong nylon
Specification : 10 ton load capacity
CTN Size : 92 X 32 X 12 CM
GW : 4.7kg per pair
Raised tracks help prevent vehicle tires from spinning on snow, sand, mud or ice
No towing or pushing required
UV Stabilized-- Resilient design
Ideal for off-road use
Prevent your vehicle's tires from spinning when stuck in snow, mud or sand
HOW TO USE
At first sign of your vehicle being stuck, STOP. Don’t keep spinning the tires- It wont work
How deep you are and use a shovel to get underneath the tires. Dig a track in front of the front tires too, so there is minimal resistance to the vehicles pathway and you can keep your momentum.
Air down tires to as much as you are comfortable with (carry a compressor with you- It is an essential trail tool).
Rocks: 15 psi min.
Soft Sand: Deep / silt / soft sand 8 psi.
Beach sand: 10-12psi min.
Mud: 15psi depending on bottom (compensate for rocks/holes/branches)
Try and get the tracks up against the tires lowest surface so it can grab a cleat and pull underneath the vehicle. Once the tracks are under the tires, DO NOT increase RPM and spin tires, as this will burn the cleats off of the tracks . Maintain a steady throttle until you feel the truck rise up, then increase throttle until you are completely out of the obstacle and able to gain traction without aide.
Only shipped to the continental United States
View full product details